Thermapen IR (White)

$210.00

Out of stock

SKU: 5024368183620 Categories: , Brand:

Enquire about this product

Call Port Melbourne, VIC: (03) 9646 4494

Call Bayside, Brighton East, VIC: (03) 9530 6350


Call For Online | Interstate (Non VIC): (03) 9646 4494

The new Thermapen IR combines the unparalleled speed and accuracy of the Thermapen Mk4 with the versatility of a professional infrared unit. Why carry two different thermometers when you can just carry the Thermapen IR?

Adjustable emissivity infrared from 0.1 to 1.0
Patented auto-rotating display
Max/Min infrared displays
Foldaway thermocouple probe
High accuracy probe to ±0.7°F (±0.4°C)
Probe readings in only 2-3 seconds
Motion-sensing sleep & wake mode
Display temps in °C or °F, 1 or 0.1° resolution
Includes NIST-traceable calibration certificate

View both infrared and penetration probe readings from either hand in any position with Thermapen IR’s patented 360° auto-rotating display. In Probe mode, set the unit down, and Sleep Mode saves battery life. Pick it up, and it turns on automatically. Close the probe when you’re done and it powers off for storage. Each unit ships with a NIST-traceable calibration certificate for both the probe and infrared so you know it’s accurate.

Infrared thermometer
Take non-contact infrared readings from virtually any surface with Thermapen IR’s precision infrared circuitry. Simply aim the infrared end of the thermometer at the target and press the Scan button to display the surface temperature, accurate to within ±1.8°F (±1.0°C). The Thermapen IR thermometer incorporates a Max/Min reading feature accessed through the Mode button (IR only). The distance-to-target ratio is 5:1, so the thermometer should be positioned as close to the target as possible. The default emissivity is 0.95, but can be adjusted between 0.1 and 1.0 as needed through the Mode button.

Please Note: Because the unit needs an opening to allow infrared wavelengths to fall upon the infrared sensor inside the housing, the Thermapen IR does not have the same Splash-Proof rating that other Thermapen’s have and should be kept away from splashes and spills.

Penetration probe – incorporating the Thermapen Mk4’s Super-Fast® thermocouple technology, penetration measurements come to a reading accurate to ±0.7°F (±0.4°C) within just 2-3 seconds. The probe conveniently folds back into the side of the instrument for safe storage when not in use. Thermapen IR incorporates a motion-sensing sleep mode (penetration probe only) which automatically turns the instrument on/off when set down or picked up, maximizing battery life. The Thermapen IR comes with a NIST-traceable calibration certificate confirming the accuracy of both sensors.

Specifications:
Infrared
Infrared Range – -58.0 to 661.8°F (-49.9 to 349.9°C)
Infrared Accuracy – ±1.8°F (±1.0°C) from 32 to 212°F (0 to 100°C) otherwise ±3.62°F (±2.0°C) or 2% of reading, whichever is greater
Infrared Response Time – 1 second
Distance/Target – 5:1 target ratio (5″ distance measures a 1″ diameter target area)
Emissivity – 0.95 default – adjustable from 0.1 to 1

Probe
Probe Range – -58.0 to 572.0°F (-49.9 to 299.9°C)
Probe Accuracy – ±0.7°F (±0.4°C) from -58 to 392°F (-49.9 to 199.9°C) otherwise ±1.8°F (±1.0°C)
Probe Response Time – 2-3 seconds (reads to within 1°F of final temperature of an ice bath in 3 seconds)
Probe – 0.13 dia. x 4.3 L inches (3.3 x 110 L mm) reduces to 0.06 dia. x 0.60 L inches (1.5 dia. x 1.75 L mm), High Performance Type K Thermocouple

General
Resolution – Factory set to 1° (user reconfigurable to 0.1°)
Units – °C/°F switchable (user reconfigurable)
Water Resistance* – IP54
Battery – 2x 3V CR2032 Lithium coin cell, 1,000 hours typical
Sleep Mode – 30 seconds after last movement detected in probe mode or after measurement button is released in IR mode
Operating Range – -4 to 122°F (-20 to 50°C), max ambient limits of Thermapen body
Display – 1 H x 1.54 W inches (25 H x 39 W mm) LCD, rotates 360°
Dimensions – 6.18 H x 1.97 W x 0.75 D inches (157 H x 50 W x 19 D mm)
Weight – 0.26 lbs (120g)
Certificate – Includes NIST-Traceable calibration certificate

* Because of its lens aperture, Thermapen IR does not have the same water resistance rating of other Thermapens.

Weight 0.2 kg
Dimensions 21 × 11 × 3 cm

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Call Now ButtonCall to Purchase